What happens due to the wrong placement of the specimen during the edge crush test?

Quality is important in any product, but it is especially crucial in products that are destined with utmost care. In the packaging industry, with the vast use of corrugated boxes, it is important for the manufacturers to use the right box so as to deliver a high-quality product to their customers. Therefore, testing several factors including edge crush strength is of utmost importance to make sure that your box will withstand the edge-wise compressive forces. Therefore, we at Presto Testing Instruments have come up with one of the highest quality lab testing equipment known as an Edge Crush Tester. This edge crush tester for corrugated boxes is an ideal testing instrument for determining the edge crush strength for papermaking, packaging, quality inspection department, and more.

When performing an edge crush test, it is important to ensure that the specimen is placed correctly in the compression plates. If the specimen is not placed correctly, then the results of the test may be inaccurate and could lead to incorrect conclusions about the strength of the material being tested. Now, let us focus on the advantages of using the Presto edge crush tester and what will happen if the specimen will be wrongly placed. So, let us get started!

What is an edge crush tester and for what purpose you should use it?

Quality control for corrugated boxes is essential for multiple reasons. The weight, durability, and stability of a corrugated box are all key factors in keeping the contents of the box safe during transport. By testing the quality of corrugated boxes, businesses can ensure that their products will reach customers safely and in good condition.

The Presto Edge Crush Test Calculator Digital Model is a simple, and accurate way to test the edge-wise compression strength of boxes. With its strong gripping clamps and feather touch controls, you can easily get accurate results on the digital display. This model is also easy to use, with no complex calibration or setup required. Simply place the box on the platform and let the machine do the work. The digital readout makes it easy to see how your box is performing under different loads, and you can be confident in the results you're getting. Whether you're testing for quality control or research purposes, the Presto Crush /RCT/ECT /FCT Digital Model is a great choice. You can even analyze the edge crush strength of fiberboards with ease.

Below we have listed the feature of the Presto edge crush tester.

• Simple and accurate read-out on a digital display.
• Electronic Force measurement by the Load
• Key lock prevents accidental or unauthorized resetting.
• Electro-mechanical Loading System.
• Sophisticated Electronic Controls for precision and easy operation.
• Competence with Peak-Hold.
• Microprocessor-based display for accurate test results
• Separate fixtures for ring crush, edge crush, and flat crush test.
• Highly accurate test results under a compression force
• Strong gripping clamps.
• Bright LED display
• Inbuilt calibration facility
• Feather touch controls

Now, let us focus on the technical specifications of Presto Edge Crush Tester digital Instrument.

Technical Specifications of Presto edge crush tester

• Capacity:100 Kgf
• Least Count: 0.01 Kgf
• Accuracy: ±2% at Full Load (with master load)
• Speed : 12.5±2.5mm/min
• Power Requirement: AC 220V, 50Hz, single phase
• Standard: IS 7063 – 2

With these features and technical specifications, you can easily perform edge crush tests on corrugated boxes, fiberboards, paper boards, cartons, etc. Now, let us discuss what will happen when the specimen will not be placed accurately.

Why it is important to place the specimen accurately on the Edge crush tester?

The edge crush test is a quality test method that is used to measure the edgewise compressive strength of corrugated cardboard. It is an important test for corrugated cardboard because it gives an indication of how much weight the cardboard can support without crushing.

The edge crush test units is conducted by placing the specimen on the fixture between the compression plates. A weight is then placed on top of the board, and the amount of weight required to crush the board is recorded.

An edge crush test is a valuable tool for designers and manufacturers of corrugated cardboard boxes and packages because it allows them to ensure that their products will be able to withstand the rigors of transportation. By using this flute testing machine, they can be confident that their products will arrive at their destination safe and sound.

Placing the specimen accurately on the Edge Crush Test Calculator testing equipment is important whenever you are going to conduct the test using this lab testing instrument. This is because the test results will be affected if the specimen is not placed correctly. Inaccurate results could lead to incorrect conclusions being drawn about the material being tested. It is therefore essential that care is taken to ensure that the specimen is placed correctly on the edge crush testing equipment before the test is conducted. By taking this simple step, you can be sure that your test results will be accurate and reliable. You can also read about how you can accurately place specimens using the Presto edge crush tester.

To know more about this testing instrument, give us a call at +91 9210903903 or email us at info@prestogroup.com. Our team of technical experts will easily consult you regarding all your queries.